Menu
Cart 0

XRS-3

X-Ray Source

Golden Engineering, XR150, XR200, XRS-3, XRS-4, X-Ray Source, EOD, EDU, Police Tactical, Explosive Disposal Unit, X-Ray Imaging, Security X-Ray Device, SSXDThe XRS-3 is a light duty X-ray machine from Golden Engineering that requires little maintenance. The modular design makes component replacement easy and cost effective. The DeWalt® 14.4V battery and battery charger are commercially available in retail stores worldwide.

Lead shielding in the XRS-3 protects the user by minimizing radiation leakage outside of the X-ray beam while a time delay button and remote cable allow the operator to move a safe distance from the unit when it is in operation. Visual and audible indicators in the unit alert the operator when the XRS-3 is activated. Also, the XRS-3 contains no radioactive material. The unit produces radiation only when it is pulsing.

Specifications

  • Length: 14 in. (35.6 cm)
  • Width: 4.5 in. (11.5 cm )
  • Height: 7.5 in. (19 cm)
  • Weight: 12 lbs. (5.5 kg)
  • Output dose: 4.0 mR / pulse max, 2.6 mR / pulse min, measured 12 in. (30 cm) from source
  • Pulse rate: 25 pulse per second (nominal)
  • X-ray source size: 1/8 in. (3 mm)
  • Maximum photon energy: 270 kVp
  • Current draw: 20 amps @ 13.4 volts
  • X-ray pulse width: 50 nanoseconds (5x10-8 seconds)
  • Power supply: DeWalt® 14.4 volt, removable, rechargeable, nickel-cadmium battery
  • Battery recharge time: 1 hour with standard DeWalt® charger, 15 minute charger available
  • Number of pulses per battery charge: 4000
  • Temperature range: -10˚F to 120˚F (-23˚C to 50˚C)
  • Maximum duty cycle: 200 pulses every 4 minutes (3000 pulses per hour)
  • Warm-up: None required
  • X-ray leakage: 3 mR per 100 pulses measured 2 in. behind the unit


Service and Training Available


Download Spec. Sheet